Turn the oven to 170°C/150°C fan/ gas 3½ and roast for 50-55 minutes until a digital probe thermometer pushed into the centre of the meat reads 45°C for medium-rare or 55°C for medium. Remove from the oven (the temperature at the centre of the joint will continue to rise briefly) and rest on a board for 20-30 minutes.
What temperature should topside beef be when cooked?
The temperature of the meat will continue to rise after it is removed from the oven and after resting should be around 65°C (149°F) for medium when ready to serve.
How long does 1kg of topside beef take to cook?
Remove from the fridge 30 mins before roasting. Season and oil generously. Brown in a 220°C/Gas 7 oven for 20 mins, then turn down to 160°C/Gas 3 and add a little water to the pan.
How long does topside take to cook?
If you like rare beef cook the joint for 20 minutes per 450g plus 20 minutes, for a medium result cook the meat for 25 minutes per 450g plus 25 minutes and for a well done joint cook it for 30 minutes per 450g plus 30 minutes. Baste the meat regularly during cooking.
What temperature should I cook roast beef?
Preheat your oven to the correct temperature to ensure your cooking time is accurate: 220C/Gas 7/fan 200C. Cook larger roasting joints on a high heat for the first 20 minutes to let the heat really penetrate the meat and give it a good crust on the outside.
Should I cover topside beef when roasting?
Roast your beef, uncovered, to the desired doneness. After removing from the oven, tent with foil and let stand 15 minutes before carving. … Roasts weighing over 8 pounds should be loosely covered halfway through roasting to avoid over-browning.
What is the best way to cook topside?
Cutting the beef into large chunks and gently cooking it in a stew is a great way to cook topside. It will become soft and should fall apart if cooked for long enough. Topside has less fat running through it than other cuts making it leaner, and therefore it would work in a lower-fat stew, casserole or curry.
How long should you cook a 1kg roast?
Roast for about 13-15 minutes per pound for rare, 17-19 minutes for medium, and 22-25 for cooked through. Check the meat with a thermometer to make sure it is the temperature you want it: 145°F for medium rare, 160°F for medium.
Should I seal my beef before roasting?
In fact these are the most yummy bit of all when cooked. You will also find that the fat may have discoloured as well, but this is quite normal. Next you need to seal the meat, this does several things; its adds colour and flavour to the outside of the meat by crisping it up. Secondly it helps seal in the moisture.
Should you sear beef before roasting?
In order to get the most flavor out of your beef, whether it is for a roast or for a stew, you must first sear it. When you pan sear beef, you quickly cook the outer surface of the meat at a high temperatures so that it caramelizes and forms a crust.
Why is topside tough?
The meat is too young and has not been hung long enough and there’s probably not enough fat around the outside. If you want to roast topside, buy it from a good butchers. The fat around the meat should be a nice creamy colour, this will keep the meat moist while you cook it.
How do you cook beef so it’s tender?
8 Simple Ways to Make Tough Meat Tender
- Physically tenderize the meat. For tough cuts like chuck steak, a meat mallet can be a surprisingly effective way to break down those tough muscle fibers. …
- Use a marinade. …
- Don’t forget the salt. …
- Let it come up to room temperature. …
- Cook it low-and-slow. …
- Hit the right internal temperature. …
- Rest your meat. …
- Slice against the grain.
Is silverside or topside better?
Silverside is leaner than Topside and can be used as inexpensive roasting joint, but the lean meat yields much better results as a slowly cooked pot roast. … Traditionally sold rolled and tied, Topside makes a good, roasting joint full of beefy flavours.
How do I cook a beef roast without drying it out?
Here’s what I do: I put a rack in the bottom of a roasting pan. Then I place the roast (no rubs or seasonings) on the rack and cover it with a lid. I put it in the oven at 400° for 15 or 20 minutes, then turn it down to 325° and roast for 30 minutes per pound. All it does is end up tough, chewy, and well-done.
How do you calculate cooking time for roast beef?
Weigh joint of beef to calculate the cooking time. Allow 20 minutes per 450g for medium, 15 minutes per 450g for medium-rare and 10-15 minutes per 450g for rare. Rub the mustard powder over the meat and season well with salt and plenty of pepper.
How long does it take to cook 2.5 kg of beef?
Reduce the heat to 190C/375F/Gas 5 and roast for half an hour per kilo for rare, adding another ten minutes per kilo for medium rare, 20 minutes per kilo for medium, and 30 minutes per kilo for well done. Remove the beef from the oven, transfer it to a carving board and cover with foil.